AFE Air Filter - AFE Intakes - Guaranteed Low Prices!

The aFe air filter can be bought with the standard factory air box still in place. However, the aFe replaces the factory OE air filter with another air filter. This filter is able to allow a large amount of air to flow through, as well as increase its performance. The Magnum Flow High Performance OE replacement filter contains many layers of cotton gauze and is reusable. Due to the way it is designed, the pleats and polyurethane material increase the amount of dust that is held in this filter. It is a popular filter, and you will not need to buy another filter after this one.

The factory cold air intake tube can also be switched to an aFe cold air intake to improve the flow of air and performance. The baffles, obstructions, and sharp bends contained within the factory intake tube can be compared to little rocks in a stream. The “wake” that each obstruction creates reduces total air flow. The aFe Super Stock cold air intake tube is manufactured with a large cylinder to allow the air to flow in a straight pattern into the body of the throttle or the turbo inlet. There are many benefits to removing the standard factory air filter and intake tube. These benefits include a faster airflow, a greater throttle response time, and a noticeable and improved torque. This system has another benefit: it is easy to put together in less than half an hour.

The latest filtration technology, called Pro-Guard 7, is aFe’s answer to dirt and dust. The Pro-Guard 7 system consists of reusable filters made of cotton gauze covered in oil. There are approximately five layers of cotton gauze in this latest filtration technology. These five layers are responsible for collecting the micro particles of dust as air moves through them. As well, there are two other layers of synthetic based polyester material that is also added to the five layers of cotton gauze. Afterward, the seven layers are then surrounded by another two layers of aluminum wire that has been covered in epoxy. The Pro-Guard 7 is an extremely efficient filter system. It has an accepted SAE standard for efficiency of filtration at 99.5%. Efficiency is important when discussing a filter, as this percentage will reveal the ability of the filter to remove dust and dirt from the vehicle’s cold intake. Regular cotton gauze filters have a standard coarse dust efficiency of 99.5%, which is simple for most filters to obtain. The aFe filter has a minimum 99.5% efficiency for fine dust efficiency – it is an understatement to say that it is better. Fine dust is much more of a problem and it should be prevented from entering the turbo diesel engine. Recent tests on the Pro Guard 7 revealed that it has a fine dust filtration percentage greater than 99.5% while a high flow of air was being sent through.

The aFe Pro-Guard 7 filtration system creates enough flow of air that is comparable to the performance of the cotton gauze filters. This clean, cool flow of flow of air is necessary to have your vehicle’s engine performing optimally. The more air that the engine takes in, the higher the engine’s torque and horsepower. If the engine is allowed to have more air, this will increase how powerful it will be. As the air in the engine is allowed through without obstruction, the engine will show a rise in its speed. This increased flow of air results in more torque and acceleration. This is obvious when you press the gas pedal. This is most evident when you are driving up a steep incline with the aFe Pro-Guard 7.

• Acura Parts
• Audi Parts
• BMW Parts
• Chevy Parts
• Ford Parts
• Honda Parts
• Hyundai Parts
• Infiniti Parts

• Isuzu Parts
• Jaguar Parts
• Jeep Parts
• Lexus Parts
• Mazda Parts
• Mercedes Parts
• Mitsubishi Parts
• Nissan Parts

• Porsche Parts
• Rover Parts
• Saab Parts
• Subaru Parts
• Toyota Parts
• Volkswagen Parts
• Volvo Parts

• HOME |
• PERFORMANCE CATALOG |
• OEM PARTS |
• PLACES |
• SITE MAP |
• CUSTOMER SERVICE |
• SHIPPING |
• VIEW CART